Zhengzhou Shunyi Technology Co., Ltd

1. Automatic detection of bottle flow rate by lamp inspection machine, automatic storage of safety bottles

The intelligent conveyor belt can automatically detect the bottle output speed and flow rate of the lamp inspection machine. The intelligent conveyor belt will automatically store bottles according to the flow rate of the bottles, adjust the storage level according to the amount of bottles, and give an early warning for automatic bottle unloading or automatic bottle loading based on the storage capacity. At the same time, the bottle storage information will be timely fed back to the printing machine for further automatic printing speed adjustment;

 

2. Automatically adjust printing speed based on bottle flow rate

When the printing machine is running, the conveyor belt will automatically activate the bottle storage system. When there is too much or too little pre storage of drugs, the intelligent conveyor belt will give the printing machine a prompt, automatically increase or decrease speed, ensuring that the drugs conveyed by the light inspection machine do not stop flowing, continuously cut, pour bottles, automatically adjust the printing speed, and enter the tray speed;

 

3. Reserved with automatic discharge outlet system

When the printing machine is shut down and the light inspection machine is running normally, the conveyor belt is automatically discharged by the bottle safety automatic discharge system, which automatically stores the drugs that have been inspected by the light, and can also alert manual discharge;

 

4. Reserved with automatic feeding system

When the light inspection machine is shut down, the leak detection machine is running normally, or the speed of the light inspection machine cannot reach the required output of the printing machine, the stored ampoule bottles can be manually loaded to ensure that the printing machine speed reaches a stable output;

 

5. When the light inspection machine or leak detection machine is shut down, manual feeding can be used to load the material, and the back-end printing machine and packaging machine equipment can operate normally without interruption. When the backend printing machine and packaging machine equipment are shut down, the light inspection machine or leak detection machine operates normally. Only when the storage bin is full, can manual cutting be used to achieve intelligent, user-friendly and convenient operation.

 

6. Improve efficiency

Making the lamp inspection packaging line not only increases packaging stability, but also saves manpower and labor, and improves production efficiency; To achieve automation and humanization of the front-end and back-end operation of the equipment and improve efficiency.

 

7. Intelligent conveyors can be divided into two types: forward feeding and back feeding.

 

8. The wiring of the intelligent conveyor can be customized according to the on-site spatial layout design. The wiring methods are linear, Y-shaped, T-shaped, one to two, and can be divided into single outlet, double outlet, etc. The best solution can be designed.

 

http://www.sypharmaprint.com/